EP  SE Wireless temperature sensor for cold rooms or showcases, battery.

The EP SE sensor (External Probe) is part of the Carel Wireless rTM SE (Remote Temperature Monitoring) system, used to monitor showcase and cold room temperature in supervised systems. The temperature measured by the sensors and the status of the digital inputs is sent via radio using the ZigBee protocol to the Access Point, in turn connected via RS485 Modbus RTU to a CAREL supervisory system. The sensor is installed on the showcases, and can accommodate two external temperature probes, NTC 10 K at 25°C ß=3435. The typical application is showcases with one sensor on the evaporator, plus one inside the compartment, together with two digital inputs to check the door and defrost status, or alternatively to control two showcases with one device.

Write a review

Please login or register to review

WS01W02M00-EP SE Wireless temperature sensor

  • Brand: Carel
  • Product Code: WS01W02M00

Related Products

WS01AB2M20-Access Point

WS01AB2M20-Access Point

RTM se Access point 12...24Vac - Modbus, ZigBee™ – RS485 Modbus® wireless gateway.The Access Point, ..

WS01U01M00-BP SE temperature sensor

WS01U01M00-BP SE temperature sensor

BP SE sensor,temperature for showcases,battery.The BP SE Sensor measures the temperature inside the ..

WS01E02M00-CI Wireless pulse counters

WS01E02M00-CI Wireless pulse counters

Ci Wireless pulse counter for energy modules, 2DI-2NTC, Modbus, battery.The CI battery-powered wirel..

WS01C010E0-Single-phase energy meter

WS01C010E0-Single-phase energy meter

Single-phase energy meter (10 A relay max 250 Vac), rTM Plug - German (European Schuko).The wireless..

WS01N02M20-RC Wireless router-pulse counter

WS01N02M20-RC Wireless router-pulse counter

Router- repeater + pulse counter for energy modules -12/24 Vac/dc.The RC wireless Router-pulse count..

Tags: WS01W02M00